Browse
 
Tools
Rss Categories

Paper Jam and Feed

1 HP Printers Fuser Drive Gear Issues Featured

There have been some printers that seem to be more prone to the fuser drive gears failing well before they seem like they should be having a problem. Most printers seem to go for hundreds of thousands of pages before there is a problem with this part of the…

2 CM6030 CM6040 MFP and the HP6015 Fuser Drive Gear Issues

The HP color CM6030/CM6040 MFP and the HP6015 color printer can develop a problem in the fuser drive section as well. These models might come up with 50.7 fuser error, which is a pressure release mechanism failure. Replacing the fuser makes no difference…

3 HP CLJ CM6030. 6040 Clear jams in the output bin

1 If jammed paper is visible in the output bin, gently pull the paper to remove it. 2 Open the right door 3 If paper has jammed as it enter the output bin, gently pull the paper to remove it. 4 close the right door.

4 HP CLJ M6030, 6040 Causes and solutions for wrapping jams in the fuser

1 Causes: The fuser pressure roller is dirty or damaged. Solution: Run several cleaning pages. 2 Causes: The guide of the fuser delivery unit is dirty Solution: Clean the guide. 3 Cause: the pressure roller of the fuser is worn or deformed. Solution: Replace…

5 HP CLJ CM6030, 6040 clear jams in the duplex area

1 Check for jammed paper inside the product. open the right door. 2 If paper is jammed below the duplexing unit, gently pull the paper downward to remove it 3 If paper is jammed inside the right door, gently pull the paper to remove it. 4 Lift the paper-feed…

6 HP CLJ CM6030, 6040 removing tray 1 pickup and separation rollers

1 Turn the power off, and then open the right door. 2 Remove the paper feed cover. 3 Remove the multipurpose upper feed guide. 4 Remove one plastic clip 5 Remove the upper roller by sliding it to the right. Rotate the lower roller and then grasp the blue…

7 HP CLJ CM6030. 6040 Clear jam in tray 1

1 Open the right door When clearing jams of long paper ( 11 x 17, 12 x 18, And A3), It may be necessary to cut or tear the jammed paper before opening the right door. 2 If paper is visible inside the right door, gently pull the paper downward to remove it.…

8 HP CLJ M6030, 6040 Causes and solution for fuser delivery delay jams

1 Cause : The loop sensor lever is not set correctly solution : Check the loop sensor lever and place it in the correct position. 2 Cause: The spring of the fuser delivery media feed sensor lever is unhooked. Solution: Check the spring of the fuser and right…

9 HP CLJ M6030, 6040 Causes and solutions for paper jam in tray 1 ( MP-tray)

1 Cause: The MP tray pickup roller or MP tray separation roller is worn or deformed. Solution: Replaced the MP-tray pickup roller and MP-tray separation roller. 2 Cause: Poor contact of the MP tray media feed sensor connector Solution: Reconnect the connectors…

10 HP CLJ M6030, 6040 jams in the fuser and transfer area

1 Open the right door 2 Lift the green handle on the transfer access panel and open the panel. 3 If paper is visible entering the bottom of the fuser, gently pull downward to remove it. 4 Close the transfer access panel 5 Open the fuser jam access door above…