Browse
 
Tools
Rss Categories

CM6030 CM6040 MFP and the HP6015 Fuser Drive Gear Issues

Author: Metrofuser Tech Support Reference Number: AA-05871 Views: 2574 Created: 09-23-2013 12:43 pm Last Updated: 09-23-2013 12:49 pm 0 Rating/ Voters

The HP color CM6030/CM6040 MFP and the HP6015 color printer can develop a problem in the fuser drive section as well. These models might come up with 50.7 fuser error, which is a pressure release mechanism failure. Replacing the fuser makes no difference as the error does not clear. The problem is not with the fuser but with the gears that drive the fuser. There are 2 gears that engage the fuser and one of them just splits causing this error. There are 3 pieces involved here, RC1-8925 damper gear, RM1-3247 one-way gear assembly and a ball bearing, XG9-0586 in case it gets lost in the printer.