Browse
 
Tools
Rss Categories

HP LJ M3027 M3035 oblique roller assembly

Author: Metrofuser Tech Support Reference Number: AA-05498 Views: 30740 Created: 2012-06-26 05:29 pm Last Updated: 2013-10-09 12:36 pm 0 Rating/ Voters

1   Remove the following components

     Left side cover

     Back cover

     I/O cover

     duplexer inlet guide

     Access plate

2  At the bottom of the device,  remove the two screws (callout  1) that secure the oblique roller

    assembly to the device, and then lift the assembly from the device.



To reinstall the oblique- roller assembly, first make sure that the tab ( callout 2 ) is parallel to the assembly.  Then line up the roller

shaft ( callout 3) with its hole on the assembly and rotate the assembly into place.  Rotate the roller toward the back  of the device to align

the gears.



______________________________

For parts pricing and availability contact
Sales@metrofuser.com or http://www.metrofuser.com