Browse
 
Tools
Rss Categories

HP CLJ CM6030, 6040 removing tray 1 pickup and separation rollers

Author: Metrofuser Tech Support Reference Number: AA-05427 Views: 1574 Created: 06-06-2012 05:20 pm Last Updated: 06-06-2012 05:20 pm 0 Rating/ Voters

1   Turn the  power off, and then open the right door.

 2   Remove the paper feed cover.

3   Remove the multipurpose upper feed guide.

4  Remove one plastic clip

5  Remove the upper roller by sliding it to the right. Rotate the lower roller and then grasp the blue plastic tab and pull the roller

     off the shaft.

6    Recycle the used rollers, following the instructions included with the new roller.

7    Remove the new rollers from the protective bag and install.

8    Attached the multipurpose upper feed guide and paper feed cover, and then close the right door.

9    Turn the power on.