Browse Submit a Ticket
 
Tools Add
Rss Categories

 Featured
HP CP3525 and CP4525 Fuser Counter Reset

Author: Reference Number: AA-04836 Views: 307 Created: 2012-01-12 10:40 am Last Updated: 2012-01-20 04:43 pm 0 Rating/ Voters

There seems to be some confusion regarding these models when the printer is calling  for a fuser kit replacement. The counter is not reset automatically when the fuser is installed. The printer should still be powered off before removing and replacing the fuser. Remove and install the replacement fuser and turn the printer on. Using the control panel scroll to   RESET SUPPLIES then select FUSER KIT and select again to reset counter.
Related Articles
  1. 5500 5550 Fuser
  2. Troubleshooting and Correcting Power Problems
  3. Toner Build up on Fuser
  4. Toner Build up on Fuser
  5. Toner Build up on Fuser
  6. Toner Build up on Fuser
  7. Toner Build up on Fuser
  8. Toner Build up on Fuser
  9. Toner Build up on Fuser
  10. Replacing the Transfer and Paper Feeding Rollers on the Hewlett Packard Color LaserJet CM1312 MFP Printer
Rss Comments 1
  • #
    [ dmzcompute]: Fuser CP4000 Series 2012-01-31 06:30 pm

    I believe you are not correct. According to HP the fuser for the CP4015, CP4525 have a burnable fuse. Only the CP3525 does not have a fuse since the fuser is supposed to last the lifetime of the product.
Info Add Comment
Nickname: Your Email: Subject: Comment:
Enter the code below:
Info Submit a Ticket 
Intranet Wiki by: KnowledgeBase Manager Pro v6.1.0 (Built with: JS.GUI - AJAX Application)