|
|
60.3 Tray 3 lifter motor failure
Author: Reference Number: AA-00582 Views: 5677 Created: 12-31-1969 07:00 pm Last Updated: 12-31-1969 07:00 pm |
0 Rating/ Voters
|
|
The tray 3 lifter-motor is not functioning. NOTE: Tray 3 can be a 500 sheet feeder or 1,500 sheet feeder accessory. 1. Reboot the printer. If the error persists turn the printer off. 2. Verify that the tray 3 lifter wire harness is fully seated in its connector on the sheet feeder PCA. 3. Replace the tray 3 lifter-driver assembly. 4. Replace the tray 3 feeder controller PCA.
|
|
|